AIRCRAFT

AirCraft Air Die Grinder Service Kit – Collet (30) For AT0007 (AT0007-SK08) At a Glance: Replacement collet for AirCraft AT0007 1/4" die grinder – restores proper clamping force and accurate accessory running. The collet is the business end of a die grinder—if it’s worn, you’ll feel it immediately: accessories slip, wobble, or don’t clamp evenly. That means more vibration, less control, and a higher chance of damaging burrs and stones. The AirCraft AT0007-SK08 service kit replaces the collet f..

Die grinder kit Professional grinder kit giving complete flexibility for most grinding and polishing needs. The die grinder has non-variable speed set to 25 000 rpm. A compressor is required with an air flow delivery of at least 115 l/min at 6.3 Bar to make use of the die grinder. Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL). Included in the kit: 10 grinding points Ø 3.2mm collet Ø 6mm collet Spanner/wrench ¼' connector....

AirCraft Air Die Grinder 6mm 4000rpm (AT0023) At a Glance: 6mm collet with a fixed 4 000 rpm speed for controlled grinding and polishing. The AirCraft AT0023 air die grinder is a practical pneumatic tool designed to give you flexible control for a wide range of grinding and polishing tasks. With a non-variable speed set to 4 000 rpm and a 6mm collet, it’s ideal for workshops where steady, predictable performance matters—especially when working with rotary burrs, abrasives and polishing ..

Die grinder - 25 000 rpm Professional die grinder giving complete flexibility for most grinding and polishing needs. The die grinder has non-variable speed set to 25 000 rpm. A compressor is required with an air flow delivery of at least 115 l/min at 6.3 Bar to make use of the die grinder. Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).....

Die grinder with guard - Ø76mm Professional die grinder giving complete flexibility for most steel cutting needs. The die grinder has non-variable speed set to 20 000 rpm. A compressor is required with an air flow delivery of at least 128 l/min at 6.3 Bar to make use of the die grinder. Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL). Ø76mm Cutting disc for die grinder: ABR07600....

AIR DISTRIBUTION RING FOR SG LVLP SPRAY GUN....

Reversible pneumatic drill The pneumatic drill is ideal for pilot hole drilling in a production line. The drill has non-variable speed set to 1800 rpm. A compressor is required with an air flow delivery of at least 106 l/min at 6.3 Bar to make use of the drill. Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).....

Reversible pneumatic drill The pneumatic drill is ideal for drilling in a production line. The drill has non-variable speed set to 550 rpm. A compressor is required with an air flow delivery of at least 170 l/min at 6.3 Bar to make use of the drill. Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).....

AirCraft Air Drill Service Kit Bearings (17,29) for AT0005 (AT0005-SK02) At a Glance: Bearing replacement kit for the AirCraft AT0005 air drill—helps eliminate rough running, excessive noise and vibration caused by worn bearings. Bearings are the quiet workhorses inside your air drill—until they wear, then everything gets louder, rougher and less precise. The AirCraft AT0005-SK02 service kit supplies the replacement bearings referenced as parts (17,29) for the AirCraft AT0005 air drill. Idea..

AirCraft Air Drill Service Kit – Chuck & Key (32-34) For AT0005 (AT0005-SK08) At a Glance: Chuck and key service kit for AirCraft AT0005 – replaces parts 32-34 to restore strong bit grip and smooth tightening. A worn chuck turns drilling into a constant fight—bits slip, run off-centre, and tightening never feels quite “right”. The AirCraft AT0005-SK08 service kit replaces the chuck and key components for the AirCraft AT0005, covering reference positions 32-34. It’s the go-to refresh when your ..

AirCraft Air Drill Service Kit – Gear & Rot. Axle (25-27) For AT0005 (AT0005-SK06) At a Glance: Gear and rotational axle service kit for AirCraft AT0005 – replaces drive components referenced as 25-27 for smooth, efficient power transfer. When an air drill starts sounding “gritty”, slipping under load, or losing that crisp torque delivery, the drivetrain is usually crying for attention. The AirCraft AT0005-SK06 service kit is built to refresh the gear and rotational axle components for the Air..

AirCraft Air Drill Service Kit – Gear Ring & Fixing Ring (28/30) For AT0005 (AT0005-SK07) At a Glance: Gear ring and fixing ring service kit for AirCraft AT0005 – replaces parts 28 and 30 to keep the drivetrain tight, aligned, and smooth. A ring gear that’s worn, chipped, or no longer sitting perfectly can turn a good air drill into a noisy, uneven, power-wasting machine. The AirCraft AT0005-SK07 service kit is designed to refresh the gear ring and fixing ring on the AirCraft AT0005, covering ..