Router Bits
Brand: PRO-TECH
MPN: KP101
Single
flute Straight bit
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead to tool breakage.
A
single-flute bit should be used where cut speed is more important than cut finish.
Making one cut per revolution is faster than making two or three. Improved chip
clearanc..
N$ 151.80
Ex VAT:N$ 132.00
Brand: PRO-TECH
MPN: KP102
Single
flute Straight bit
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead to tool breakage.
A
single-flute bit should be used where cut speed is more important than cut finish.
Making one cut per revolution is faster than making two or three. Improved chip
clearanc..
N$ 151.23
Ex VAT:N$ 131.50
Brand: PRO-TECH
MPN: KP104459
Double
flute Straight bit
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead to tool breakage.
Use
a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating
vibration that degrades the cut finish.
Two cuts per revolution yield a smooth s..
N$ 545.10
Ex VAT:N$ 474.00
Brand: PRO-TECH
MPN: KP4MM-2
Double
flute Straight bit
Solid
Carbide
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead to tool breakage.
Use
a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating
vibration that degrades the cut finish.
Two cuts per revoluti..
N$ 491.63
Ex VAT:N$ 427.50
Brand: PRO-TECH
MPN: KP410411
Rail & Stile cutter set
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table. Both cutters are fixed to the shank - The rail cutter can&t be changed into the stile cutter.
This router bit has a 12.7mm shank (shaft) that will fit most large routers with the correct collet. Please ensure that you select a router bit with a shank (shaft) siz..
N$ 2,994.60
Ex VAT:N$ 2,604.00
Brand: PRO-TECH
MPN: KP103510
Wall display T-slot cutters
T-slot bit
These T-slot cutters will allow you to cut both the groove as well as the wider slot in one pass. A carbide cutting edge is part of the neck of the router bit. The anti-kickback design allows for better performance and reduced vibration under cutting load.
Designed for creating T-slot wall panels and many other useful purposes.
Build your own sturdy and attractive slotted wall to display workshop tools – hanging by a hook.
Cuts all composi..
N$ 1,079.28
Ex VAT:N$ 938.50
Brand: PRO-TECH
MPN: KP10353
Wall display T-slot cutters
T-slot bit
These T-slot cutters will allow you to cut both the groove as well as the wider slot in one pass. A carbide cutting edge is part of the neck of the router bit. The anti-kickback design allows for better performance and reduced vibration under cutting load.
Designed for creating T-slot wall panels and many other useful purposes.
Build your own sturdy and attractive slotted wall to display workshop tools – hanging by a hook.
Cuts all composi..
N$ 1,306.40
Ex VAT:N$ 1,136.00
Brand: PRO-TECH
MPN: KP10354
Wall display T-slot cutters
T-slot bit
These T-slot cutters will allow you to cut both the groove as well as the wider slot in one pass. A carbide cutting edge is part of the neck of the router bit. The anti-kickback design allows for better performance and reduced vibration under cutting load.
Designed for creating T-slot wall panels and many other useful purposes.
Build your own sturdy and attractive slotted wall to display workshop tools – hanging by a hook.
Cuts all composi..
N$ 1,378.85
Ex VAT:N$ 1,199.00
Brand: TORK CRAFT
MPN: CKP1201
Tork Craft CKP1201 Corner Round Router Bit 3/16 Inch Radius 1/4 Inch Shank
At a Glance: 3/16 inch corner round router bit with 1/4 inch shank, tungsten carbide cutting edge and 1/2 inch
bearing for smooth edge rounding.
The
Tork Craft CKP1201 Corner Round Router Bit is designed to create neat, smooth and professional rounded edges on timber and suitable
woodworking materials. With its 3/16 inch radius, this bit is ideal for adding a softer, cleaner finish to sharp ..
N$ 164.45
Ex VAT:N$ 143.00
Brand: TORK CRAFT
MPN: CKP1202
Tork Craft CKP1202 Corner Round Router Bit 1/4 Inch 1/4 Inch Shank
At a Glance: Corner round router bit with 1/4 inch shank, tungsten carbide cutting edge and 1/2 inch bearing
for smooth rounded woodworking edges.
The Tork Craft CKP1202
Corner Round Router Bit is designed to create clean, smooth and decorative rounded edges on timber and suitable woodworking materials. It
is ideal for softening sharp corners on shelves, frames, table edges, cabinet parts, trim wo..
N$ 197.23
Ex VAT:N$ 171.50
Brand: TORK CRAFT
MPN: CKP1203
Tork Craft CKP1203 Corner Round Router Bit 5/16 Inch Radius with 1/4 Inch Shank
At a Glance: 5/16 inch corner round router bit with 1/4 inch shank, tungsten carbide cutting edge and 1/2 inch bearing for smooth rounded woodworking edges.
The Tork Craft CKP1203 Corner Round Router Bit is designed to create smooth, clean and professional rounded edges on timber and suitable woodworking materials. With its 5/16 inch radius, this bit is ideal for softening sharp edges on shelves, furnit..
N$ 208.15
Ex VAT:N$ 181.00
Brand: TORK CRAFT
MPN: CKP1204
Tork Craft CKP1204 Corner Round Router Bit 3/8 Inch Radius 1/4 Inch Shank
At a Glance: 3/8 inch corner round router bit with 1/4 inch shank, tungsten carbide cutting edge and 1/2 inch bearing for smooth rounded woodworking edges.
The Tork Craft CKP1204 Corner Round Router Bit is designed to create smooth, decorative and professional rounded edges on timber and suitable woodworking materials. With its 3/8 inch radius, this router bit is ideal for softening larger sharp edges on shel..
N$ 211.60
Ex VAT:N$ 184.00