Electric
Brand: TORK CRAFT
MPN: TCCS0355-SK03
Tork Craft Support Bracket Compl. (2/4/12/20-28/30-38/89-90) For TCCS0355
At a Glance: Support bracket complete assembly (parts 2, 4, 12, 20–28, 30–38, 89–90) for the Tork Craft TCCS0355
When a cut-off saw starts feeling “loose”, misaligned, or inconsistent, the culprit is often the supporting bracketry that keeps everything sitting where it should. The Tork Craft TCCS0355-SK03 Support Bracket Compl. is the correct replacement assembly for the TCCS0355, covering the support bracket compone..
N$ 527.28
Ex VAT:N$ 458.50
Brand: SAWSTOP
MPN: SAW CTS020
SUPPORT FOOT FRONT & LEFT REPLACEMENT FOR CTS....
N$ 670.45
Ex VAT:N$ 583.00
Brand: SAWSTOP
MPN: SAW CTS019
SUPPORT FOOT FRONT & RIGHT REPLACEMENT FOR CTS....
N$ 670.45
Ex VAT:N$ 583.00
Brand: SAWSTOP
MPN: SAW CTS023
SUPPORT FOOT REAR & CENTER REPLACEMENT FOR CTS....
N$ 154.68
Ex VAT:N$ 134.50
Brand: SAWSTOP
MPN: SAW CTS022
SUPPORT FOOT REAR & LEFT REPLACEMENT FOR CTS....
N$ 454.83
Ex VAT:N$ 395.50
Brand: SAWSTOP
MPN: SAW CTS021
SUPPORT FOOT REAR & RIGHT REPLACEMENT FOR CTS....
N$ 358.80
Ex VAT:N$ 312.00
Brand: SAWSTOP
MPN: SAW TGI2WA004
SUPPORT LEG MOUNT HARWARE BAG TGI2 TABLE....
N$ 478.40
Ex VAT:N$ 416.00
Brand: SAWSTOP
MPN: SAW RT-ST2
SUPPORT LEGS FOR IN-LINE ROUTER TABLE TOP FOR PCS/CNS/ICS SAWS SAWSTOP....
N$ 1,197.73
Ex VAT:N$ 1,041.50
Brand: TORK CRAFT
MPN: TCAG0115-SK13
Tork Craft Switch & Capacitor Set (42/43/44/52/53) Service Kit (TCAG0115-SK13)
At a Glance: Replacement switch and capacitor component set (parts 42, 43, 44, 52 & 53) for the Tork Craft TCAG0115 angle grinder
When an angle grinder starts acting up—cutting out, refusing to start, running intermittently, or feeling “on/off” in the worst possible way—the problem is often in the electrical control chain. The Tork Craft TCAG0115-SK13 Switch & Capacitor Set Service Kit replaces the key control c..
N$ 185.15
Ex VAT:N$ 161.00
Brand: TORK CRAFT
MPN: POL06-2G-SK05
Tork Craft Switch & Trigger (37–40) For POL06-2G
At a Glance: Genuine replacement switch and trigger kit for the Tork Craft POL06-2G polisher
The Tork Craft switch and trigger kit (Cat No. POL06-2G-SK05) is a genuine service part for the Tork Craft POL06-2G 1500W 180mm polisher.
The switch is the heart of your control system – if it becomes sticky, intermittent or fails completely, the tool becomes frustrating or unsafe to use.
This kit replaces the key switch and trigger..
N$ 531.30
Ex VAT:N$ 462.00
Brand: TORK CRAFT
MPN: TCRH0800-SK07
Tork Craft Switch Assembly Compl. (27, 35-36) For TCRH0800 (TCRH0800-SK07)
At a Glance: Complete switch assembly covering reference parts (27, 35 and 36) for the Tork Craft TCRH0800.
When a rotary hammer refuses to start, cuts out mid-job, or only runs if you hold the trigger “just so”, the switch assembly is usually where the drama lives. Dust ingress, arcing, wear and hard site life can all take their toll on the trigger and internal contacts. The Tork Craft TCRH0800-SK07 Switch Assembly..
N$ 330.63
Ex VAT:N$ 287.50
Brand: SAWSTOP
MPN: SAW CTS038
SWITCH BOX & ASSEMBLY & REPLACEMENT FOR CTS....
N$ 2,996.33
Ex VAT:N$ 2,605.50